Cart
You have no items in your shopping cart
Park Tool SR-12.2
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver.
C$49.99
Park Tool CM-5.3
The Cyclone™ uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts.
C$44.99
Sale-7%
Park Tool PH-1.2
Engineered for fit, function, and leverage, these L-shaped shop quality hex wrenches are a must have for every workshop.
C$133.90
C$124.99
Park Tool AP-1 Adhesive primer
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Competes with Loctite® 7649™.
C$39.99
Park Tool HHP-2
Park Tool has the answer to your headset and cartridge cup pressing needs. The HHP-2 accurately aligns and presses 1", 1 ⅛", 1 ¼", and 1.5" headset cups.
C$307.99
Park Tool ND-1
Designed to quickly and easily drive conventional nipples on spokes during wheel building
C$34.79
Park Tool PW-5
This home mechanic pedal wrench from Park Tools will last you several lifetimes (It can also open beer's).
C$25.99
Sale0%
Park Tool TS-2.2
The world’s most popular wheel truing stand and the standard of the bicycle industry for 35 years is now, more than ever, the stand to choose for daily shop use. The new TS-2.2 combines time-tested functions from the legendary TS-2 with new features to ma
C$553.99
C$553.99
Park Tool HBH-2
The Handlebar Holder is designed to prevent the handlebars and front wheel from rotating when a bike is mounted in a Park Tool Repair Stand. Fits handlebars up to 32mm and oversized top tubes up to 50mm, the HBH-2 works on almost any road or mountain bike
C$37.99
Park Tool BBT-30.3
The BBT-30.3 Bottom Bracket Bearing Tool Set is designed for installation and removal of the bearings used in BB30, PressFit 30 (PF30), 386EVO, and BBright™ bottom bracket systems.
C$65.99
Park Tool BSH-4
When building or truing wheels, holding bladed spokes can be a real challenge. The BSH-4 securely holds them and prevents twisting.
C$17.99
Sale0%
Park Tool GSC-1
Park Tools GearClean Brush is perfect for cleaning the chain and derailleur. It also works a treat on your brakes and any other place where dirt accumulates.
C$7.99
C$7.99
Sale0%
Park Tool CWP-7
The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive™, Octalink®) crank arms. Also fits BNI cranks on Bosch® e-bikes. The CWP-7 is made for t
C$22.99
C$22.99
Sale-20%
Park Tool FWS-2
The Park Tool FWS-2 Fold-Up Wrench Set combines all the popular hex and Torx® compatible wrench sizes of the AWS-10 and TWS-2 into one convenient set. The multi-position fold-ups are comfortable, lightweight, and slip-resistant.
C$49.99
C$39.99
Park Tool RP-4
Professional quality ring plier made from forged, heat-treated cro-moly steel with a return spring and vinyl dipped grips.
C$35.99
Park Tool DP-2
The DP-2 quickly installs to take the place of a bicycle pedal in order to make drivetrain adjustments with the pedals removed.
C$20.99
Park Tool JH-1
A great place to keep small parts, cable end caps, grease, and whatever else you can think of.
C$58.99
Park Tool CCP-22
The CCP-22 uses a long, comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks.
C$24.39
Park Tool CG-2.4
A dirty bicycle drivetrain causes poor shifting and unnecessary wear to expensive parts. The Park Tool Chain and Drivetrain Cleaning Kit contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings.
C$66.99
Park Tool BT-2
Commonly referred to as a “4th Hand,” the Park Tool Cable Stretcher pulls cables tight for adjustment of derailleurs and brakes. It features one-hand operation with a thumb lock to hold the cable tight while your hand is freed up to tighten bolts and nuts
C$71.99
Park Tool FRW-1
The FRW-1 is a one-inch socket that securely holds Park Tool freewheel and cassette lockring tools.
C$81.99
Park Tool FR-5.2H
A fast and convenient tool to remove and install 12-spline Shimano® / SRAM®-style cassette lockrings, as well as similar lockrings on rotor discs.
C$69.99
It seems everything was simpler in 1956 and bicycles were no exception. A common day of repairs consisted of a few flat tires, a broken spoke and possibly a coaster brake hub overhaul. As the 1960s arrived, so did calliper brakes, shifting systems, and lightweight components. One problem surfaced along with these complicated new parts. No tools! My father, Howard, and his business partner, Art Engstrom, were both "hands-on" guys, usually figuring problems out for themselves. Both were up to the challenge as they crafted their own problem-solvers. Most of these early tools were built from scratch with whatever materials and leftovers they could find.
One of the first time-savers they invented was a stand that held the bike off the ground allowing easy, back-saving access to any part of the bike. This original stand was put together using legs from a dining room table, an empty shell casing and a truck axle from a 37 Ford. As other shops, and eventually Schwinn Bicycle Company, saw the stand in action, requests were made for a production model. Park Tool Company was born!
The line grew quickly to include a wheel truing stand, more repair stands including a double-arm shop version wrenches gauges, fixtures and consumer tools soon joined the company's offerings. The retail side of the business also grew to earn Top Ten Schwinn dealer status fifteen years in a row including number one overall in 1977. In the early 1980s, all three retail shops were sold to concentrate on the tool business.
Our history says a lot about who we are and what we do. We still solve problems ourselves and we still insist on a "hands-on" philosophy of invention, testing, and production. The sixty employees of Park Tool take great pride in building the best bicycle tools in the world. Since that first stand, we've built hundreds of thousands more, reaching bike shops worldwide. Since the first-hand tool, we've built millions more and our line now includes over 400 different items and a recent history of fifteen to twenty new products introduced each year.
In April of 2013, we celebrated our 50th anniversary and moved into our fourth location, an 80,000 square foot facility built specifically for us. We're doing more manufacturing in-house than ever and our plans include expanding to do even more ourselves. The new facility also includes a photo and video studio so we can expand our web repair help articles and how-to videos. We're poised and ready for the next 50 years!
Howard and Art never imagined in 1963 that Park Tool Company would grow to what it is today, but we will not take our spot at the top for granted. Our pledge for the future is simple: Build the best tools. Our commitment to that principle is stronger than ever. We build bicycle tools and maintenance equipment, it's all we do and we're good at it. Thank you for choosing Park Tool. We're honoured to make tools for you.